Doppy oil-air lubrication is widely used
When the industry is developing rapidly, low failures, energy saving, environmental protection, and reliable operation of equipment have become the goals pursued by enterprises. 50% to 60% of the cost...
Retrofit of old machine tools adopts trace lubrication
MQL processing is a processing method that atomizes a small amount of environmentally friendly lubricating oil with compressed air as the power and provides lubrication and cooling for cutting tools a...
The sawing machine adopts oil-air lubrication technology
At present, the cutting of sawing machine is widely used in industry, but the lubrication of sawing machine nowadays mostly uses a large amount of emulsion to be poured between the raw material and th...
Do you know the replacement cycle of Volvo wiper blades?
Replacement cycle: one year For the replacement of the wiper blade, it is best to replace it once a year. When using wiper blades daily, avoid “dry scraping”, which can easily damage the w...
Doppy brand micro lubrication
There are many differences between oil-air lubrication and other traditional lubrication methods. Modular structure design, the number of lubrication points increases or decreases according to the act...
Application of micro-lubrication on vertical lathe
Micro-lubrication is applied to vertical lathe processing in two application forms: external spray type and internal cooling type. The external spray type micro-lubrication is easy to install, as long...
Exhaust gas treatment equipment manufactured by Shanghai Automobile? Exhaust gas treatment equipment of automobile production wo...
There are 3 types of motorcycle paint parts: steel parts, glass steel parts and plastic parts.Plastic parts mainly include: luggage, guards, etc.Plastic parts are mainly made of ABS moulding. In the m...
Doppy oil and gas micro lubrication has obvious advantages
Oil-air lubrication is different from other traditional lubrication methods, and Doppel’s micro-air-air lubrication technology has obvious advantages. Modular structure design, the number of lub...
Dual-channel micro-lubrication equipment
Doppelt is committed to leading the development of the lubrication industry in the direction of energy conservation and environmental protection. It is committed to the research and application of mic...
Interpretation of bamboo fiber
Bamboo fiber is a cellulose fiber extracted from naturally grown bamboo. It is the fifth largest natural fiber after cotton, hemp, wool and silk. Bamboo fiber has good air permeability, instant water ...
Metal cutting lubrication chooses trace lubrication
At present, metal cutting processing includes cutting oil pouring lubrication processing, dry cutting processing, micro lubrication processing, low temperature micro lubrication processing and other f...
Oil mist lubrication for deep hole machining
Deep hole processing is the processing of holes with a ratio of hole depth to diameter of 5 or more. In the machining industry, more holes are processed, but the service life of the drill bit and the ...
The use of trace oil and gas lubrication can increase the service life of the saw blade
Compared with the traditional cutting fluid lubrication method, the sawing oil-air lubrication device has great advantages: ● The sawing machine no longer needs to add filtering facilities, which save...
Advantages of dual-channel micro-lubrication equipment
Doppelt is committed to the development of the lubrication industry in the direction of energy conservation and environmental protection, and is committed to the research and application of micro-lubr...
Introduction to the importance of trace lubricants
In the application of micro-lubrication system, the generation of oil mist is very critical. There are many factors that affect the effect of MQL micro-lubrication. At present, most users do not have ...