There are many differences between oil-air lubrication and other traditional lubrication methods.
Modular structure design, the number of lubrication points increases or decreases according to the actual application. The amount of oil and gas can be supplied regularly and quantitatively, realizing on-demand supply and avoiding resource waste;
Oil-air lubrication can maintain the bearing position and friction position with continuous fresh lubricating oil input and reduce the temperature rise of the bearing. Tests have proved that at the same speed, the use of oil-air lubrication for spindle bearings of the same model and working conditions can reduce the temperature rise of the outer ring by 9℃～16℃ compared with oil mist lubrication. While keeping the temperature rise of the bearing outer ring the same, Oil-air lubrication can increase the bearing speed factor by more than 25%;
Oil-air lubrication has little or no pollution to the environment. The gas discharged through the bearing is basically compressed air, which contains almost no oil or contains very little oil, which is beneficial to the health of the operators;
Due to the continuous supply of fresh lubricating oil and the outflow of fresh air inside the bearing, foreign impurities are difficult to enter and the internal dirt is also easily discharged, which can greatly improve the service life of the bearing.
Oil-air lubrication is the continuous and accurate delivery of a small amount of lubricating oil to the inside of the electric spindle bearing, which is energy-saving and environmentally friendly, reduces costs, and improves reliability.
It can be seen that Peifeng Doppy Micro-Oil Oil Lubrication not only has unique and professional technical advantages, but also conforms to national policies, conforms to the spirit of resource conservation, environmental friendliness, reasonable lubrication, and efficiency, and has broad development prospects.
Link to this article：Doppy brand micro lubrication
Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.：Cnc Machining，Thank！^^