In the application of micro-lubrication system, the generation of oil mist is very critical. There are many factors that affect the effect of MQL micro-lubrication. At present, most users do not have ...
(1) High rolling speed Generally, in the dry hobbing process, the line speed of the high-speed steel hob of the coating (TiAlN) is required to reach 180m/min Even higher; the line speed of the hard al...
Gear hobbing processing currently generally uses cutting oil for pouring lubrication. Such a lubrication method has some disadvantages: large oil consumption, harsh operating environment, oil mist per...
In deep hole machining, the traditional lubrication method is mainly based on pouring cutting fluid and cutting oil lubrication. This method has a great impact on the processing environment, waste liq...
Small-character inkjet printer inks are generally black ink. Black ink is the matching ink for most inkjet printer customers. The reason why it is called ordinary black ink is because it represents th...
Metal cutting is an important link in industrial activities and has been used in the production process long ago. The process of metal cutting is to use cutting tools to remove excess material from th...
In high-speed machining, the thermal characteristics of the electric spindle is a main factor that affects the machining accuracy, and directly affects the increase in the speed of the electric spindl...
(1) High hobbing speed <br /> Generally, in dry hobbing processing, the linear speed of the coated (TiAlN) high-speed steel hob is required to reach 180m/min or even higher; for the hard alloy s...
In deep hole machining, the traditional lubrication method is mainly based on pouring cutting fluid and cutting oil lubrication. This method has a great impact on the processing environment, waste liq...
Modern warfare has increasingly higher requirements for the suitability, mobility and rapid response capabilities of military off-road vehicles, and the requirements for the performance of military ...
Discrimination of the Lean Limit of LPG on Ignition Engines Wang Zhensuo, Deng Baoqing, Li Liguang2, Xiao Zongcheng, Wang Huiping1 (1. School of Automotive Engineering, Jilin University, Changchun, Ji...
Advantage 1. It is compatible with the high-speed cutting of the machining center; The machining center is a high-speed, efficiency-increasing processing equipment. Both the running speed and the resp...
The advantages of the micro-oil-air lubrication technology itself: 1) Protect the environment: use plant-based synthetic lubricants, no waste cutting oil and waste liquid are produced, and the environ...
In high-speed machining, the thermal characteristics of the electric spindle is a main factor that affects the machining accuracy, and directly affects the increase in the speed of the electric spindl...
In most cases, lathes use cutting fluid lubrication and cooling. The use of a large amount of cutting fluid has a great impact on the operating environment and the health of the operators. At the same...