Oil mist lubrication processing is a kind of quasi-dry processing, which is a processing method between dry and wet. That is, a very small amount of lubricating oil is used to complete the lubricating...
When the industry is developing rapidly, low failures, energy saving, environmental protection, and reliable operation of equipment have become the goals pursued by enterprises. 50% to 60% of the cost...
MQL processing is a processing method that atomizes a small amount of environmentally friendly lubricating oil with compressed air as the power and provides lubrication and cooling for cutting tools a...
At present, the cutting of sawing machine is widely used in industry, but the lubrication of sawing machine nowadays mostly uses a large amount of emulsion to be poured between the raw material and th...
Replacement cycle: one year For the replacement of the wiper blade, it is best to replace it once a year. When using wiper blades daily, avoid “dry scraping”, which can easily damage the w...
There are many differences between oil-air lubrication and other traditional lubrication methods. Modular structure design, the number of lubrication points increases or decreases according to the act...
Micro-lubrication is applied to vertical lathe processing in two application forms: external spray type and internal cooling type. The external spray type micro-lubrication is easy to install, as long...
There are 3 types of motorcycle paint parts: steel parts, glass steel parts and plastic parts.Plastic parts mainly include: luggage, guards, etc.Plastic parts are mainly made of ABS moulding. In the m...
Oil-air lubrication is different from other traditional lubrication methods, and Doppel’s micro-air-air lubrication technology has obvious advantages. Modular structure design, the number of lub...
Doppelt is committed to leading the development of the lubrication industry in the direction of energy conservation and environmental protection. It is committed to the research and application of mic...
Bamboo fiber is a cellulose fiber extracted from naturally grown bamboo. It is the fifth largest natural fiber after cotton, hemp, wool and silk. Bamboo fiber has good air permeability, instant water ...
At present, metal cutting processing includes cutting oil pouring lubrication processing, dry cutting processing, micro lubrication processing, low temperature micro lubrication processing and other f...
Deep hole processing is the processing of holes with a ratio of hole depth to diameter of 5 or more. In the machining industry, more holes are processed, but the service life of the drill bit and the ...
Compared with the traditional cutting fluid lubrication method, the sawing oil-air lubrication device has great advantages: ● The sawing machine no longer needs to add filtering facilities, which save...
Doppelt is committed to the development of the lubrication industry in the direction of energy conservation and environmental protection, and is committed to the research and application of micro-lubr...