<h2> </h2> <h2> The sawing oil-air lubrication device has great advantages compared with the traditional cutting fluid lubrication method:<br /> ● The sawing machine no longer needs to add filtering facilities, saving the initial investment. <br /> ● There is no need to process the materials after oil and gas lubrication, and you can directly enter the following types of work. <br /> ● The oil consumption of oil-air lubrication is very low, and the cost of lubricating oil is greatly reduced. <br /> ● It will make the processing process clean and environmentally friendly, which is more conducive to the maintenance of the machine tool. <br /> ● The surface of the workpiece is dry, so it can prevent rust without subsequent cleaning. <br /> To increase the life of the saw blade, it is necessary to choose a more suitable lubrication method. The oil-air lubrication device has an undoubted effect in improving the lubrication effect and life of the saw blade. According to statistics, the oil-air lubrication greatly reduces the saw blade’s use in sawing. The frequency of replacement, the use of sawing oil-air lubrication, not only saves maintenance costs, its benefits are far better than the use of emulsion lubrication cooling method, so the use of sawing oil-air lubrication device is undoubtedly an economical and reliable lubrication solution. <br /> The sawing oil-air lubrication device is a consumable oil-air lubrication. In the lubrication method, the oil-air injection method is used to automatically apply a micro-fine lubricating oil mixed with oil and gas to the saw blade. The edge of the saw blade can well lubricate the saw blade, which is an economical and reliable lubrication method. The supply of lubricating oil is also usually intermittently supplied by the saw blade during the cutting process. There are two ways to adjust the amount of oil. One is to adjust the oil supply frequency and the pneumatic pulse generator to adjust the time interval. The second is to adjust the amount of oil supplied by a miniature lubrication pump. <br /> </h2>
Link to this article：Minimal oil and gas lubrication for sawing and cutting
Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.：Cnc Machining，Thank！^^