Effectively controlling the temperature rise of the high-speed rotating electric spindle bearing is a very important indicator of the electric spindle, and the temperature rise of the spindle is close...
Concentric tube Tur oil-air lubrication system is suitable for machine tool electric spindles and various high-speed bearings, center frames, guide rails, lead screws and other oil and gas lubrication...
There are many differences between oil and gas lubrication and other traditional lubrication methods, and Doppel’s micro oil and gas lubrication technology has obvious advantages. Modular struct...
There are many differences between oil and gas lubrication and other traditional lubrication methods, and Doppel’s micro oil and gas lubrication technology has obvious advantages. Modular struct...
High running speed is one of the characteristics of the electric spindle, and good lubrication of the bearing is an important indicator to ensure its normal operation. Therefore, matching a suitable e...
The electric spindle runs at a high speed, and the good lubrication of the bearing is an important index to ensure its normal operation.Therefore, matching a suitable electric spindle lubrication syst...
Chain transmission is very common in mechanical transmission, but sometimes the importance of chain lubrication is ignored. Therefore, the service life of the chain is affected. The increase in replac...
Bearings are an indispensable part of mechanical equipment. The reliable operation of bearings in electric spindles is even more important, which directly affects the performance indicators of machine...
Micro-lubrication technology has obvious advantages over traditional cutting fluid lubrication and cooling technology. Significantly reduce the discharge of waste fluid and cleaning fluid; use a very ...
When the industry is developing rapidly, low failures, energy saving, environmental protection, and reliable operation of equipment have become the goals pursued by enterprises. The cost of power mach...
Micro-lubrication technology is a technology that sprays a small amount of lubricating oil into the cutting area in the form of mist, which has the effect of lubricating and cooling cutting tools and ...
With the continuous development and technological progress in the field of metal processing, the concept of green processing has become more and more popular. The traditional lubrication cooling metho...
With the continuous development of metal processing technology and technological progress, green processing has become more and more popular. The traditional way of using cutting fluid for lubrication...
More and more factories are reducing the use of cutting fluid in machining, and micro-lubrication is becoming more and more popular. This is because, on the one hand, micro-lubrication can improve the...
Traditional gear processing usually adopts wet cutting method.With the development of machine tools, tools, and materials, high production efficiency, high precision, energy saving, environmental prot...