Home » Automotive Guide » Analyze the influencing factors of the performance of the electric spindle

Analyze the influencing factors of the performance of the electric spindle

Posted by: AutoMotive 2021-10-19 Comments Off on Analyze the influencing factors of the performance of the electric spindle

High running speed is one of the characteristics of the electric spindle, and good lubrication of the bearing is an important index to ensure its normal operation.Therefore, matching a suitable electric spindle lubrication system is very important.

The lubrication-related factor that affects the running accuracy of the electric spindle is the heating of the electric spindle.The internal heat source of the electric spindle comes from two aspects: 1. The heating of the spindle bearing; 2. The heating of the built-in motor of the electric spindle.

To solve the heating of the motor, the stator of the motor needs to be cooled, which can be achieved by circulating water cooling to take away the heat of the motor; to solve the problem of heating of the spindle bearing, it is necessary to take away the heat generated by the bearing operation in time.Traditional thin oil lubrication is to transport a large amount of lubricating oil to achieve intrusive lubrication. At the same time, the lubricating oil takes away the heat.This kind of lubrication method has disadvantages. First, it wastes a lot of lubricating oil. Second, the friction between the lubricating oil molecules and the pipeline during the cycle of lubricating oil generates a lot of circulating heat, which causes the oil temperature to rise. Not only can it not have a good cooling effect, but it will also cause the temperature of the bearing to rise, which is not conducive to the performance of the spindle bearing.Therefore, eliminating the generation of frictional heat between molecules in the liquid becomes the key to solving the problem.Practice shows that oil-air lubrication can fundamentally avoid this situation.First of all, oil-air lubrication provides a small amount of lubricating oil to meet the amount of lubricating oil required by the bearing.Secondly, oil-air lubrication will not produce heat due to friction of lubricating oil molecules, and at the same time, clean compressed air will take away the heat generated by the bearing and keep the spindle running at a stable temperature.This can effectively solve the problem of thermal deformation caused by temperature rise.

Doppel has been committed to the research on oil-air lubrication of electric spindles for many years. It has mature oil-air lubrication products and rich application experience, which will bring greater value to customers.

Doppel’s electric spindle oil-air lubrication has the following advantages:

1,
A positive pressure environment can be obtained in the bearing chamber of the electric spindle to prevent the intrusion of external impurities.

2. The compressed air can have a good cooling effect on the bearing.

3,
1-8 independent lubrication points can reliably monitor the oil supply of each lubrication point.

4. The consumption of lubricating oil is controlled by precise metering, so the consumption is very low.

5,
Modular structure, module components can be increased or decreased according to the number of lubrication points to realize multi-point combination;

6. Fully electronic program control, quick setting through convenient man-machine interface;

7,
The oil-air lubrication equipment is easy to operate and use, and the maintenance cost is low.

The oil-air lubrication device of Doppel electric spindle has: accurate oil supply, parameterized operation, simple operation, and the system realizes the monitoring of liquid level, air source pressure, and flow output. At present, it has been used as a supporting tool for many home appliance spindle manufacturers.

Link to this article:Analyze the influencing factors of the performance of the electric spindle

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.:Cnc Machining,Thank!^^