The composition and use of Shandong sewage suction truck

&nbsp; The composition and use of the sewage suction truck in Shandong: The sewage suction truck part consists of a power take-off, a drive shaft, a vacuum suction pump, a pressure tank, a hydraulic part, a pipe network system, a vacuum pressure gauge, a fecal window, a hand washing device, etc. It is equipped with high-power vacuum sewage suction pump and high-quality hydraulic system. The dirt in the tank can be dumped directly through the back cover, and it has the characteristics of high vacuum (more suction than fecal suction truck), large tonnage, high efficiency and wider use. <br /> The sewage suction truck and the fecal suction truck have the same principle, but the sewage suction truck and the fecal suction truck have different purposes. The difference is that the tank body of the sewage suction truck is a round tank with a tighter structure, which can withstand higher pressure and provide greater suction. It can be used to collect, clean and transport sewage and sludge. It is suitable for the suction, shipment, and discharge of the sludge in the sewer. Large objects such as mud, silt, stones, bricks, etc. can be absorbed. <br /> Since the suction hose is always immersed in the liquid surface, after the air in the fecal tank is sucked, it becomes thinner and thinner because it cannot be replenished. As a result, the pressure in the tank is lower than the atmospheric pressure, and the fecal liquid is Under atmospheric pressure, it enters the container through the fecal suction hose. Or because the siphon tube is close to the bottom of the tank, when the air is continuously discharged into the fecal tank, it is compressed because it has no way out, causing the pressure in the tank to be higher than atmospheric pressure. The fecal liquid is discharged through the siphon and suction hose under the action of compressed air. Outside the tank. <br /> The sewage suction truck has the characteristics of high suction efficiency, self-priming, self-draining and direct irrigation. Pumping time for full manure tank: ≤5min, suction range: ≥8m. It has the characteristics of long service life, fast working speed, simple operation and convenient transportation. <p> The main purpose of the sewage suction truck click to open the link.<br /> The sewage suction truck is mainly used to clean urban sewers, pipelines, sediments, and dredge dead angle mud trenches. It can also be used to clean industrial drainage pipes, walls, etc., and It can also be used for sprinkling, transporting water and flushing roads, and can be used for fire fighting in emergency. <br /> The sewage suction truck adopts a special sewage suction pump with domestic technology, which has large suction power and long suction range. It is especially suitable for the suction, shipment and discharge of sludge in the sewer, especially for sucking sewage mud, Large objects such as silt, stones, bricks, etc., and substances with low water content. Pumping time for full sewage (feces) tank: ≤5min, suction range: ≥10m. Self-priming and self-discharging, long life, fast working speed and convenient transportation. The discharge of the sewage suction truck has two methods: pressurized discharge and self-flow discharge. The sewage suction truck is self-priming and self-discharging, and the rear cover can be opened and self-discharging impurities in the tank. It has high suction efficiency, self-priming, self-draining and direct irrigation, etc. Features, quick and easy operation. It is suitable for large, medium and small town sanitation and municipal departments. </p> <p> The tank body of the sewage suction truck can be made of carbon steel and stainless steel. The dedicated part of the sewage suction truck takes power. </p>