High-pressure governing valve and low-pressure governing valve to control the thermal and electrical load of the unit

Less equipment to be operated and simple operation When the Austrian 12MW unit is in normal operation, the main oil pump outlet oil pipeline supplies oil to the lubrication and regulation system respectively. During the start and stop phases of the unit, the outlet oil pipeline of the AC oil pump supplies oil to the lubrication and speed control systems respectively. In the cranking state of the turbine, by pressing the mechanical handle of the manual brake and stop on the side of the machine head, the oil supply to the turbine speed control system is cut off, and the AC oil pump only supplies oil to the lubricating oil system and the cranking device. When the domestic 12MW unit is operating normally, the outlet pipe of the main oil pump supplies oil to the No. 1 and No. 2 injectors and the speed control system respectively, the No. 1 injector supplies oil to the main oil pump inlet, and the No. 2 injector supplies the turbine lubricating oil system. Fuel supply. During the start and stop stages of the unit, the high-pressure start oil pump supplies oil to the turbine speed control system and lubricating oil system. In the cranking state of the turbine, the high-pressure start oil pump should be stopped, and the AC lubricating oil pump should be started to supply oil to the lubricating oil system and the cranking device. There are fewer oil pipelines to be installed and the system layout is relatively simple. On the outlet oil pipe of the main oil pump of the Austrian 12MW steam turbine, the system is divided into a power oil pipe and a lubricating oil pipe through a 517 orifice plate. The power oil is controlled by the oil pressure to switch the high-pressure speed regulating valve and the low-pressure regulating valve respectively to control the thermal and electrical load of the unit.

The oil pipeline of the domestically made 12MW steam turbine governor system is divided into pressure oil, primary pulsation oil, secondary pulsation oil, etc. Under the action of the primary pulsating oil pressure and the secondary pulsating oil pressure, the pressure oil switches the high-pressure speed regulating valve and the low-pressure rotating baffle respectively to control the thermal and electrical load of the unit. The main oil pump of the 12MW steam turbine produced in Austria is a self-priming high-pressure oil pump, and the AC oil pump is a high-pressure screw pump with high output. Since the main oil pump is a self-priming oil pump, no other auxiliary equipment is needed to supply oil to its inlet, and the output of the main oil pump and AC oil pump are relatively large, which can meet the needs of unit operation. The main oil pumps of domestic 12MW steam turbines are mostly radial centrifugal pumps. In order to ensure the normal operation of the inlet oil pressure, an injector is generally designed to supply oil to its inlet.

For automotive parts and parts machining, PTJ Shop offers the highest degree of OEM service with a basis of 10+ years experience serving the automotive industry. Our automotive precision shop and experts deliver confidence. We have perfected the art of producing large component volumes with complete JIT reliability, backed by the quality and long-term reliability our customers expect.