To enhance the stability and strength of the lower cross beam itself, combined with the design characteristics of the body structure, it is necessary to change the opening structure of the lower cross beam assembly to a closed section structure, that is, add a radiator lower cross beam reinforcement plate structure at the bottom of the lower cross beam to make the lower cross beam assembly Form a closed section. At the same time, due to the weak strength of the connection points between the lower beam assembly and the left and right columns of the radiator, only 3 bolts on the left and right are used for connection, it is difficult to ensure the stability of the quadrilateral of the radiator frame. To move, a connecting plate structure needs to be added to the inner side of the lower crossbeam of the radiator and the left and right columns to ensure the reliability of the lower frame. The response curve of the upper left installation point of the water tank has not been improved to a large extent before and after the improvement of the radiator frame structure, and the change trend before and after the improvement is basically the same. This may be related to the lack of improvement of the upper beam structure in the radiator frame structure.
After the structural improvement of the lower beam of the radiator frame, the dynamic stiffness performance of the lower left installation point of the water tank in the X and Z directions has been greatly improved. The dynamic stiffness performance of the radiator frame has not changed before and after the improvement of the radiator frame structure, which shows that the location, location and direction of the radiator frame structure improvement are closely related to the dynamic stiffness performance in the three directions of X, Y, and Z. In this article, since only the lower beam structure of the radiator frame is improved, the opening structure is changed to a closed cross-section structure, and a connecting plate is added to the inner side of the lower beam and the left and right columns of the radiator, but the upper beam is not improved. Therefore, the simulation analysis results only show that the dynamic stiffness performance of the lower mounting point changes.
For automotive parts and parts machining, PTJ Shop offers the highest degree of OEM service with a basis of 10+ years experience serving the automotive industry. Our automotive precision shop and experts deliver confidence. We have perfected the art of producing large component volumes with complete JIT reliability, backed by the quality and long-term reliability our customers expect.
Link to this article：Enhance the stability and strength of the lower crossbeam itself, combined with the design features of the body structure
Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.：Cnc Machining，Thank！^^