There are many differences between oil-air lubrication and other traditional lubrication methods. <br /> Modular structure design, the number of lubrication points increases or decreases according to the actual application. The amount of oil and gas can be supplied regularly and quantitatively, which realizes on-demand supply and avoids waste of resources; <br /> Oil and gas lubrication can maintain the bearing position and friction position with continuous fresh lubricating oil input and reduce bearing temperature rise. Tests have proved that at the same speed, the use of oil-air lubrication for spindle bearings of the same model and working conditions can reduce the temperature rise of the outer ring by 9℃～16℃ compared with oil mist lubrication. While keeping the temperature rise of the bearing outer ring the same, Oil-air lubrication can increase the bearing speed factor by more than 25%; <br /> Oil-air lubrication has little or no pollution to the environment. The gas discharged through the bearing is basically compressed air, which is basically free of oil or contains very little oil, which is beneficial to the health of the operators; <br /> Because of the continuous supply of fresh lubricating oil and the outflow of fresh air inside the bearing, it is difficult for foreign impurities to enter. The internal dirt is also easily discharged, which can greatly increase the service life of the bearing. <br /> Oil-air lubrication is to continuously and accurately transport a small amount of lubricating oil to the inside of the electric spindle bearing, which is energy-saving and environmentally friendly, reduces costs, and improves reliability. <br /> It can be seen that Peifeng Doppy Micro-Oil-air Lubrication not only has unique and professional technical advantages, but also conforms to relevant policies, conforms to the spirit of resource conservation, environmental friendliness, reasonable lubrication, and increased efficiency, and has a broad development. prospect. <br />
Link to this article：Doppy brand micro-lubrication equipment
Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.：Cnc Machining，Thank！^^