CNC Machine Coordinate System
CNC Machine Coordinate System In the process of writing a CNC machining program, in order to determine the relative position of the tool and the workpiece, the movement path of the tool must be descri...
Extrusion rod related to aluminum extrusion press
The extrusion rod of the aluminum extrusion machine, we have mentioned more maintenance knowledge in the past, and it seems that we have not mentioned the extrusion rod. In fact, this is a relatively ...
Process Genus Wire cutting
Process introduction Wire cutting is the abbreviation of numerical control electric discharge wire cutting processing, which is developed on the basis of electric spark perforation and forming p...
Difference Between Cylindrical Milling Cutter And End Milling Cutter
Difference Between Cylindrical Milling Cutter And End Milling Cutter Milling cutters are rotary tools with one or more teeth for milling. We are more commonly used to process planes on horizontal mill...
What are the specifications and models of the pe tube?
Plastic pipes can be divided into polyvinyl chloride (PVC) pipes, polyethylene (PE) pipes, polypropylene (PP) pipes, polybutylene (PB) pipes, ABS pipes, etc. according to their materials. Because PE p...
The Relationship Between Machine Bearing Oil Gap And Working Environment
Spindle bearing oil is a special lubricating oil for the spindle bearings of precision machine tools and similar equipment. It plays a very important role in ensuring the working accuracy and performa...
The Advantages And Characteristics Of Aluminum Formwork Compared To Traditional Formwork
Aluminum formwork is a construction formwork made of aluminum alloy, also known as aluminum alloy formwork. It is designed according to the modulus. The aluminum formwork is extruded by special equipm...
The Skills List Of CNC Turning
The Skills List Of CNC Turning The machining order of the parts: drilling first and then flat ends (this is to prevent shrinkage during drilling); roughing first, then finishing (this is to ensure the...
Structural changes of titanium alloy rods during hot extrusion
Structural changes of titanium alloy rods during hot extrusion The appearance of titanium rods is very similar to steel, with a density of 4.51 g / cm3, which is less than 60% of steel. It is the lowe...
How To Cut Trapezoidal Thread?
The Methods Of Cut Trapezoidal Thread In most factories, one or more people are responsible for adjusting the machine, and then a special person is responsible for operating the machine. These people ...
China Common Surface Treatment Technology Of Aluminum Parts
China Common Surface Treatment Technology Of Aluminum Parts For the machining of aluminum parts, the colors that can be achieved by anodizing are relatively limited, usually silver, bronze, titanium, ...
What is dimensional chain
Basic Concept Of Dimensional Chain There are two characteristics of the dimensional chain: closedness-each size of the dimensional chain constitutes a closed system in a certain order; correlation-one...
Sharpening of drill bits
Sharpening Of Drill Bits A twist drill is a tool that drills a round hole of a work piece by rotating cutting relative to a fixed axis. It is named after its spiral flute with a spiral shape resemblin...
The Influence Of Degreasing, Alkali Etching And Light Extraction On The Aluminum Profiles Oxidation Quality
The aluminum profile is sent to the oxidation workshop after extrusion, aging heat treatment, and operation. There are natural oxide films, oil films, dust, bumps and scratches, and metamorphic alloy ...
Preparation Principle Of Anodized Aluminum
Preparation Principle Of Anodized Aluminum Regarding anodization, the following will specifically explain the aspect of anodized aluminum, because it is in the knowledge system of anodization, so it c...