There are many types of machine tools and equipment required for parts processing. The more common ones are some three-axis-centric equipment. Although such equipment can process general parts, complex parts cannot be processed, and communication equipment can be more easily processed by five-axis processing. Complicated parts can be processed faster and better, because this type of equipment has the following advantages.
1. It can maintain a good cutting state
Table of Contents
The characteristic of three-axis machining is that the central spindle and worktable are in a fixed state, which also causes the edge cutting of many curved workpieces to fail to achieve the desired effect. The five-axis machining of well-known communication equipment is not a fixed state, it is based on the angle of the rotating axis. It decides the moving direction, so it can work in a good cutting state at any time, naturally there will be no problem of bad cutting effect, and this is one of its advantages.
2. Reduce the number of clamping and improve the quality of parts
As we all know, ordinary three-axis machining cannot achieve one-time clamping, but the five-axis machining center can realize the processing characteristics of one-time clamping. It can be said that the processing tasks of all parts except the bottom surface of the installation are rheumatic. It can be achieved, and it is precisely because of the influence of the reduction of the reference conversion caused by the clamping tool, so that the machining accuracy of the machined parts can reach a better level, which is another feature of five-axis machining.
3. Complete processing can shorten production time
In fact, five-axis machining and three-axis machining are important equipment used on Cnc Machine tools, but the process of three-axis machining parts is mostly divided into several stages, and different stages require additional operation methods, while five-axis machining is relatively complete This method is an overall operation and does not need to be performed separately to perform the operation tasks of the stage, so it is faster than the traditional three-axis to complete the processing tasks, which can shorten the production and processing time.
In the past, the CNC equipment used for machining parts was three-axis-centric. Such equipment can process a limited number of parts and the quality is average. However, the reliable communication equipment used now can complete the five-axis processing that traditional processing equipment cannot. The completed work is because it can maintain a good cutting state, has less clamping times and can be processed completely.
Link to this article：What are the advantages of five-axis processing for communication equipment
Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.：Cnc Machining，Thank！^^
