In an ideal world, the process cooling system can operate without any cost, and at the same time can work perfectly to keep the plastic process running smoothly and profitably. However, since there is...
Passivation is affected by the cleanliness of the parts and also by the choice of acid. Is the effect of nitric acid or citric acid the most? Xianji.com has translated and compiled some foreign materi...
Die casting machine is a machine used for pressure casting. Including two kinds of hot press room and cold press room. Later, they are divided into two types: straight type and horizontal type. The di...
CNC machine tools are generally not classified, but classified. The common classification is: the classification of CNC machine tools The Classification according to processing method and process use ...
Ultrasonic welding is a widely recognized and accepted process for joining thermoplastic materials. It has many advantages, including process reliability and repeatability, lower energy consumption th...
The manufacturing tolerances of injection molded parts are very high, and thermoformed parts usually have some deviations, but recent developments have shown that thermoforming is far behind injection...
The manufacturing industry has undergone revolutionary changes due to technological development. However, pharmaceutical companies have only just begun to see the potential for innovative product crea...
Nowadays, with the advent of Industry 4.0, machine vision technology is gradually playing a very important position in industrial automation. The continuous innovation of machine vision technology has...
Direct measurement and indirect measurement 1. Direct measurement Direct measurement is to install the detection device directly on the execution part, such as grating, inductosyn, etc. to directly me...
Perfect surface treatment is essential for the production of high-quality metal parts. Failure to properly prepare the surface of the part will not only damage the final appearance of the part, but al...
Insert overmolding is a strict technology in injection molding, but in the initial stage, it is not often handled by robots. It usually requires manual assistance, especially for inserts with difficul...
Calculation formula V=Pi*D*n/1000; it has nothing to do with the feed (F). The specific derivation process is as follows: The so-called linear speed is the relative speed of the contact position of th...
Titanium alloys and aluminum alloys are similar in the following respects: Both metals are used to make aircraft structural components, in which case the components may require 90% of the material to ...
Electric spindle is a new technology that integrates machine tool spindle and spindle motor in the field of CNC machine tools in recent years. The electric spindle is a set of components, which includ...
The application of machining automation production line in the machine tool industry, machine tools are available in many domestic manufacturers. However, truss robots, CNC machine robots, and machini...