Home » Technology » What Skills Does the CNC Lathe Have for Thin-Walled Part Machining?

What Skills Does the CNC Lathe Have for Thin-Walled Part Machining?

Posted by: Fymicohuang 2021-10-10 Comments Off on What Skills Does the CNC Lathe Have for Thin-Walled Part Machining?

Keywords:CNC lathe processing,CNC Turning parts,CNC Turning Services,Custom CNC Turning

We all know that CNC lathe processing thin wall is more difficult, especially the processing of the inner hole, because in the cutting process, thin wall by the role of cutting force, easy to produce deformation.Lead to appear thus ellipse or middle small, two ends big “waist shape” phenomenon.In addition, due to the poor heat dissipation during processing, thin-walled casing is easy to produce thermal deformation, resulting in errors in size and shape.The important problem to be solved is how to reduce the influence of cutting force on the deformation of the workpiece. Next, HW Precision Technology will take you to explore the skills of CNC lathe processing of thin-walled parts.

Numerical control lathe processing of thin-walled parts is a more difficult problem in turning processing, the reason is that thin-walled parts of poor rigidity, weak strength, very easy to deformation in the processing, so that the shape and position error of parts increase, not easy to ensure the processing quality of parts.Using the characteristics of high machining accuracy and high production efficiency of numerical control lathe, and considering the effect of technological problems on the machining quality of parts, the experiments on the clamping of the workpiece, the geometric parameters of the cutting tool and the programming of the program were carried out to overcome the deformation of thin-walled parts in the process of machining effectively.The machining accuracy is guaranteed, which provides a good basis and reference for better processing of thin-walled parts in the future.

No matter what form CNC lathe machining parts, the first must start from the view of the part diagram.The figure shows that the thin-walled parts processing, easy to produce deformation, here not only clamping is not convenient, but also the parts to be processed that is difficult to process, the need to design a special thin-walled casing, shaft protection.

If you are interested in our products, you are welcome to send your requirements with your drawings to us via email. We are very glad to give you the most favorable quotation. If so, our email is: [email protected],Click on the email address on the left to send us an email quickly and easily

Link to this article:What Skills Does the CNC Lathe Have for Thin-Walled Part Machining?

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.:Cnc Machining,Thank!^^