The battery of the automobile generator test system adopts the ordinary car battery, which needs to be fully charged before the test to provide excitation power for the automobile generator.The speed sensor uses the LJ12A4-Z/BY inductive proximity switch as the sensor. This is a non-contact detection device that can convert the generator speed into a voltage signal output, which is transmitted to the main control computer through the data acquisition card.
The multi-function data acquisition card adopts PCI-6034E type. This type of data acquisition card is a multi-function data acquisition control card based on 32-bit PCI bus. It supports DMA mode and buffer mode; supports unipolar and bipolar analog signal input and resolution The rate is 16bits, the sampling frequency is 200kS/s; the signal input range is ±10V, 16 single-ended/8 differential analog input channels; TTL digital I/O port, 2 24-bit timer counters and other functions.
In order to measure the no-load characteristics, output characteristics and external characteristics of automobile generators, the virtual instrument software LabVIEW system interface is designed according to actual needs.After the hardware is connected, the measurement starts. First, the no-load measurement is performed, that is, to keep the generator no-load, the output current is 0, and the relationship between the voltage at the output terminal of the generator and the speed is measured.Then measure the output characteristics, that is, the generator terminal voltage is maintained at 14V, and the relationship between the generator output current and the generator speed is measured to determine the no-load speed and the full-load speed of the generator.
*After measuring the external characteristics of the generator, that is, the generator maintains a constant speed, and the relationship between the generator terminal voltage and the output current is measured. In the actual measurement, the generator speed is adjusted to 2000r/min. Through the measurement of the above three characteristic curves, the performance of the tested automobile generator can be judged.
The automotive parts and parts machining, PTJ Shop offers the highest degree of OEM service with a basis of 10+ years experience serving the automotive industry. Our automotive precision shop and experts deliver confidence. We have perfected the art of producing large component volumes with complete JIT reliability, backed by the quality and long-term reliability our customers expect.
Link to this article：The function of data acquisition card in generator test system
Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.：Cnc Machining，Thank！^^