Home » Automotive Guide » Doppy Micro Lubrication Used in Vertical Lathe Processing

Doppy Micro Lubrication Used in Vertical Lathe Processing

Posted by: AutoMotive 2021-10-19 Comments Off on Doppy Micro Lubrication Used in Vertical Lathe Processing

Micro-lubrication is applied to vertical lathe processing in two application forms: external spray type and internal cooling type.

The external spray type micro-lubrication is easy to install and meets the requirements as long as it does not affect the processing and the movement of other parts.
The internal cooling type micro-lubrication is that the lubricant is sprayed to the cutting area in the form of suspended oil mist particles. The key is to maintain the reliable flow of suspended particles. Therefore, the structure of the machine tool should be designed to ensure the transportation of suspended particles and the reliable sealing of the passages. , Optional fixtures and cutting tools should be matched to ensure that the lubricating oil mist particles can reach the cutting area.Vertical lathes can be used with internal cooling type micro-lubrication and external cooling type micro-lubrication. The micro-lubrication system can be equipped according to the specific conditions of the machine tool. Most vertical lathes do not have internal cooling channels, so external nozzles are often used to deliver MQL oil mist to lubricate the cutting area of ​​the cutting tool. The following is a brief description of its characteristics:

When the lubricating device receives the processing signal, the injection system enters the working state, and the lubricating oil is supplied by the micro pneumatic lubrication pump at a set frequency, and the sprayed oil mist particles are formed at the nozzle to reach the surface of the workpiece.The compressed air at each lubrication point is kept in a constant supply state. When the processing is completed, the lubricating device is powered off and stops working at the same time.The oil supply frequency is adjusted according to the oil film formed in the injection area as the standard.
To
The system low liquid level monitoring can give an alarm when the oil level is low, and remind the maintenance personnel of the lubrication system that the oil needs to be added. The low liquid level alarm signal can be linked with the machine tool alarm system.

External spray lubrication adopts precise metering micro-lubrication technology, which saves oil consumption, and reliably sprays lubricating oil on the surface of workpieces and cutting tools in the form of tiny oil mist particles at the terminal to form a lubricating oil film.
1. Jet lubrication can save a lot of oil consumption without causing waste;
2. Low consumption of lubricating medium, measured in units of ml/h;
3. Accurate measurement of oil volume and accurate supply;
4. The system has few moving parts, reliable operation and low maintenance;
5. The oil and gas pipeline layout is simple, easy to install and maintain.
The automotive parts and parts machining, PTJ Shop offers the highest degree of OEM service with a basis of 10+ years experience serving the automotive industry. Our automotive precision shop and experts deliver confidence. We have perfected the art of producing large component volumes with complete JIT reliability, backed by the quality and long-term reliability our customers expect.

Link to this article:Doppy Micro Lubrication Used in Vertical Lathe Processing

Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.:Cnc Machining,Thank!^^