These automotive air-conditioning additives can enhance compressor sealing, reduce wear, reduce noise, and improve compressor work efficiency, help greatly reduce the internal friction of the air conditioner, increase sealing, and enhance the cooling effect, making the air The internal functional components play a higher working efficiency, and use this to achieve the purpose of extending the service life of the car air conditioner.
There is also a set of air-conditioning system additives priced at about 400 yuan in the auto supplies market. Through this product, the car owner can carry out a series of processes such as maintenance, cleaning and strengthening of the car air-conditioning.
1. After adding the repair agent, the air outlet temperature of the air conditioner can be reduced by 2~5℃, and the cooling effect of the air conditioner can be improved;
2. Reduce the frictional resistance of the air conditioner compression, reduce the load of the compressor by 15~23%; reduce wear and tear, and extend the service life of the air conditioner by 2 times;
3. Eliminate the abnormal noise of the worn compressor;
4. Save fuel by 10% and reduce the cost of car use.
Some car owners will add Freon refrigerant to the car. When it is very hot in summer, too much Freon refrigerant will cause the high pressure to exceed the limit, the engine will vibrate like thunder, and sometimes there will be a boiling phenomenon.
The maintenance master said that this was mainly due to the low power of the engine and the aging of some equipment. At this time, the air conditioner is turned on, and the engine load is too heavy to drive the air conditioner compressor; if you continue to use the air conditioner forcibly, the loss of the car will increase, and if it is serious, it may cause the car to self-ignite. Therefore, he suggested that relevant automotive air-conditioning additives should be used appropriately in this situation.
Reprint Statement: If there are no special instructions, all articles on this site are original. Please indicate the source for reprinting.：Cnc Machining，Thank！^^